TSD-830 Automatic Computer Scimitar Machine
Performance characteristics:
- It can realize six functions of bending, bridge position, front olecranon, rear olecranon, front flat cutting, and rear flat cutting at the same time, fast and accurate;
- After the graphics have been bent on the machine, the board can be directly proofread without side trimming and polishing;
- Realize the full automatic scimitar in the true sense, which greatly saves the time of installing the knife and making the plate;
- Six functions can be used at the same time, or only one or several of them can be selected;
- The powerful and complete software control system makes it handy to any requirement of the scimitar.
- It is suitable for bending of electronic board knife mold, box knife mold, card knife mold, doll and plastic knife mold.
model |
TSD-830 |
Features |
Scimitar, bridge position, flat cut, external olecranon |
Cutting method |
Pendulum or automatic cut |
Blade thickness |
0.45mm, 0.53mm, 0.71mm, 1.05mm |
Blade height |
8MM-30MM |
Maximum bending angle |
100° |
Minimum 90° bending radius |
0.4mm |
Minimum front bending size |
1.5MM |
Minimum cutting size of rear |
1.0MM |
Feeding accuracy |
±0.03MM |
Bending flatness |
±0.2MM |
Best graphics format |
DXF format |
Air pressure requirement |
0.6MPA |
Power requirements |
380V, 50/60Hz (standard configuration) |
power |
1.3KW |
weight |
500KGS |
Dimensions |
2700×1050×1350MM (length×width×height) |
Reviews
There are no reviews yet.